THE FEATURES OF COMBINED USE OF RHINOCEROS AND AVEVA MARINE DURING SHIP DESIGNING
Abstract
The choice of Rhino and Aveva combination is substantiated that occurs during working with threedimensional surface of transport ship. The aim of this choice is to optimize the ship’s initial design process. The features of imported models to Aveva Marine from third-party CAD systems are specified. Likely mistakes which could emerge during work with surface are listed. These mistakes are associated with perception of objects’ geometry by different systems. Ways for flaws elimination of imported ship surface are indicated. It will ensure the successful establishment of various internal objects and further calculations. Algorithms for improvement of imported surface and it’s geometry analysis which is based on the parameters of section area curve are presented. The features of data’s preparation are considered for further calculation of surface’s characteristics which are made in the module Hydrostatics & Hydrodinamics. The functional features of the system are reviewed. These features are allow to estimate vessel’s approximate lightweight.
References
2. Chan Dinj Tjen Informacionnihe tekhnologii v sudostroenii: suthestvuyuthie sistemih, sferih i vozmozhnosti ikh ispoljzovaniya / Chan Dinj Tjen // Vestnik Astrakhanskogo gosudarstvennogo tekhnicheskogo universiteta. Seriya: Morskaya tekhnika i tekhnologiya. – 2009. – № 1. – S. 105-109.
3. Andreyjchikova, A. Yu. Analiz sovremennihkh sistem avtomatizirovannogo proektirovaniya v mashinstroenii (obzor) / A. Yu. Andreyjchikova, A. F. Galj // Sb. nauchn. trudov NUK. – 2013. – № 1. – S. 27-31.
4. Kabanova N. N. Sovmestnoe ispoljzovanie SAPR Rhinoceros i Aveva Marine na nachaljnihkh stadiyakh proektirovaniya sudna [Elektronniyj resurs] / N. N. Kabanova // Suchasnі tekhnologії proektuvannya, pobudovi, ekspluatacії і remontu suden, morsjkikh tekhnіchnikh zasobіv і іnzhenernikh sporud : vseukraїnsjka naukovo-tekhnіchna konferencіya z mіzhnarodnoyu uchastyu / N. N. Kabanova. NUK. – 2014. Rezhim dostupu : http://conference.nuos.edu.ua/catalog/lectureDetail conferenceId=26184&lectureId= 28475.
5. Fomin B. Rhinoceros. NURBS modelirovanie dlya Windows ili Russkiyj nosorog : perevod s angliyjskogo s dopolneniyami i ispravleniyami / Boris Fomin // Cengage Learning. – 2006. – 289 s.
6. Ron K.C. Cheng Inside Rhinoceros 5.0 [Text] / Ron K.C. Cheng. – 2014. – 656 p.
7. Surface. TM-2001 [Text]. – Cambridge : Aveva Solutions Ltd, 2010.
8. Compartment. TM-2002 [Text]. – Cambridge : Aveva Solutions Ltd, 2010.
9. Hydrostatics. TM-2005 [Text]. – Cambridge : Aveva Solutions Ltd, 2010.
10. Hydrodynamics. TM-2007 [Text]. – Cambridge : Aveva Solutions Ltd, 2010.
